SKF THAP 150E/SK1 Air-driven Hydraulic Oil Injector, 150 Mpa (21750 psi) Complete Set
THAP 150E: Air driven pump 150 MPa (21 750 psi)
1077589: Pressure gauge 300 MPa (43 500 psi)
228027 E: Nipple G 3/4 (m) - G 1/4 (f)
729834: Pressure hose (3 m /9.8 ft)
729831: AQuick connection coupling
729832: AQuick connection nipple
Set delivered in a wooden carrying case (size 690 x 245 x 310 mm / 27.6 x 10.0 x 12.4 in)
Nr. | Designation | Description |
1 | THAP 150E | Air driven pump 150 MPa (21 750 psi) |
2 | 1077589 | Pressure gauge 300 MPa (43 500 psi) |
3 | 228027 E | Nipple G 3/4 (m) - G 1/4 (f) |
4 | 729834 | Pressure hose (3 m /9.8 ft) |
5 | 729831 A | Quick connection coupling |
6 | 729832 A | Quick connection nipple |
Set delivered in a wooden carrying case (size 690 x 245 x 310 mm / 27.6 x 10.0 x 12.4 in) |
Designation | THAP 150E |
Nominal hydraulic pressure | 150 MPa (21 750 psi) |
Operating air pressure | 7 bar* (102 psi) |
Air consumption | 200 litre per minute / 7.1 cubic feet per minute |
Operating temperature range | 0 °C - 45 °C (32 °F - 113 °F) with fluid maximum viscosity of 1500 mm2/s |
Volume/stroke | 1,92 cm3 (0.12 in.3) |
Oil outlet | G3/4 |
Length | 350 mm (13.9 in.) |
Height | 202 mm (8 in.) |
Width | 171mm (6.7 in.) |
Weight | 19 kg (41.8 lb) |
* Air pressures above 7 bar are automatically limited to 7 bar by an internal air limiter. |
Nr. | Designation | Description |
1 | THAP 150E | Air driven pump 150 MPa (21 750 psi) |
2 | 1077589 | Pressure gauge 300 MPa (43 500 psi) |
3 | 228027 E | Nipple G 3/4 (m) - G 1/4 (f) |
4 | 729834 | Pressure hose (3 m /9.8 ft) |
5 | 729831 A | Quick connection coupling |
6 | 729832 A | Quick connection nipple |
Set delivered in a wooden carrying case (size 690 x 245 x 310 mm / 27.6 x 10.0 x 12.4 in) |
Designation | Description |
TMJG S100 | Pressure gauge protection sleeve 100 mm |
LHMF 300/5 | Mounting fluid (5 litre) |
LHDF 900/5 | Dismounting fluid (5 litre) |
Designation | Description |
728245/3A | Carrying case |
THAP E-2 | Set of hoses |
THAP E-3 | Air valve assembly |
THAP E-4 | Air inlet block |
THAP E-5 | Air motor assembly |
THAP E-6 | Oil inlet block |
THAP 150 E-7 | Oil injector assembly |
THAP E-8 | Release valve assembly |
THAP E-9 | Connection nipple assembly |
THAP 150 E-10 | Repair kit |
THAP E-11 | Gauge plug assembly |
THAP E-12 | Carrying handle |
Designation | THAP 150E |
Nominal hydraulic pressure | 150 MPa (21 750 psi) |
Operating air pressure | 7 bar* (102 psi) |
Air consumption | 200 litre per minute / 7.1 cubic feet per minute |
Operating temperature range | 0 °C - 45 °C (32 °F - 113 °F) with fluid maximum viscosity of 1500 mm2/s |
Volume/stroke | 1,92 cm3 (0.12 in.3) |
Oil outlet | G3/4 |
Length | 350 mm (13.9 in.) |
Height | 202 mm (8 in.) |
Width | 171mm (6.7 in.) |
Weight | 19 kg (41.8 lb) |
* Air pressures above 7 bar are automatically limited to 7 bar by an internal air limiter. |
Nr. | Designation | Description |
1 | THAP 150E | Air driven pump 150 MPa (21 750 psi) |
2 | 1077589 | Pressure gauge 300 MPa (43 500 psi) |
3 | 228027 E | Nipple G 3/4 (m) - G 1/4 (f) |
4 | 729834 | Pressure hose (3 m /9.8 ft) |
5 | 729831 A | Quick connection coupling |
6 | 729832 A | Quick connection nipple |
Set delivered in a wooden carrying case (size 690 x 245 x 310 mm / 27.6 x 10.0 x 12.4 in) |
Designation | Description |
TMJG S100 | Pressure gauge protection sleeve 100 mm |
LHMF 300/5 | Mounting fluid (5 litre) |
LHDF 900/5 | Dismounting fluid (5 litre) |
Designation | Description |
728245/3A | Carrying case |
THAP E-2 | Set of hoses |
THAP E-3 | Air valve assembly |
THAP E-4 | Air inlet block |
THAP E-5 | Air motor assembly |
THAP E-6 | Oil inlet block |
THAP 150 E-7 | Oil injector assembly |
THAP E-8 | Release valve assembly |
THAP E-9 | Connection nipple assembly |
THAP 150 E-10 | Repair kit |
THAP E-11 | Gauge plug assembly |
THAP E-12 | Carrying handle |