B-RAD SELECT BL 4000

Brushless Select Battery Torque Wrenches
B-RAD SELECT BL 4000
Tool Model: B-RAD SELECT BL 4000
Part No.28270
• TORQUE RANGE: 800 - 4000 Nm
• SPEED: 3 RPM
• WEIGHT: 6 Kg with battery, excluding reaction arm and impact socket
• SQUARE DRIVE: 1 inch square drive (replaceable) 
• BATTERY: 1x 18V 8.0 Ah/144 Wh and 1x 5.2 Ah/93 Wh Li-ion battery
• NOISE LEVEL: Maximum 65 dB
• REPEATABILITY ON SAME JOINT * : +/- 3%.
* Test results from RAD’s certified calibration lab

Giá: 0932182327

Mã sản phẩm: SÚNG SIẾT ỐC BULONG DÙNG PIN

Model: 800 - 4000 Nm

B-RAD SELECT BATTERY SERIES
Torque range: 50 – 7.000 Nm

The new B-RAD SELECT battery series torque wrenches comes with two simple buttons to increase or decrease the value by 10 Nm.
At the four-digit display the set torque value is displayed. The B-RAD SELECT remembers the last set torque value even after the battery has been removed.

Part
No.
Model Square
drive
Torque range Speed

Noise
Level

Inch Nm RPM DBA
30213 B-RAD SELECT 275 ½" or
¾"
50 - 270 Nm 47 65
28264 B-RAD SELECT 700 ¾" 170 - 700 Nm 21 65
28266 B-RAD SELECT 1400 ¾" 300 - 1.400 Nm 10 65
28267 B-RAD SELECT 1400-2 ¾" 300 - 1.400 Nm 71 65
28268 B-RAD SELECT 2000 1" 400 - 2.000 Nm 6 65
28269 B-RAD SELECT 2000-2 1" 400 - 2.000 Nm 19 65
28270 B-RAD SELECT 4000 1" 800 - 4.000 Nm 3 65
28271 B-RAD SELECT 4000-2 1" 800 - 4.000 Nm 19 65
28272 B-RAD SELECT 7000 1,5" 1.400 - 7.000 Nm 2 65
Part
No.
Model Square
drive
Weight Dim. A Dim. B Dim. C Dim. D
30213 B-RAD SELECT 275 ½" or
¾"
3,2 Kg 228 mm 63 mm 68 mm 262 mm
28264 B-RAD SELECT 700 ¾" 3,5 Kg 231 mm 63 mm 67 mm 262 mm
28266 B-RAD SELECT 1400 ¾" 3,5 Kg 231 mm 63 mm 67 mm 262 mm
28267 B-RAD SELECT 1400-2 ¾" 4,3 Kg 279 mm 63 mm 67 mm 262 mm
28268 B-RAD SELECT 2000 1" 4,0 Kg 244 mm 69 mm 69 mm 262 mm
28269 B-RAD SELECT 2000-2 1" 4,9 Kg 298 mm 69 mm 69 mm 262 mm
28270 B-RAD SELECT 4000 1" 6,0 Kg 285 mm 81 mm 81 mm 266 mm
28271 B-RAD SELECT 4000-2 1" 6,7 Kg 337 mm 81 mm 81 mm 266 mm
28272 B-RAD SELECT 7000 1,5" 8,8 Kg 295 mm 95 mm 95 mm 272 mm

TOOL KIT INCLUDING:

  • B-RAD SELECT 4000
  • Standard reaction arm (PN: 27022)
  • Two retaining rings (PN: 21474)
  • Two batteries with quick charger
  • Calibration certificate
  • Usermanual
  • Safety instructions on USB stick
  • Weatherproof storage case.


The B-RAD is especially suitable for jobs where electricity or compressed air are not available.

The number of cycles per battery is depending on stud length, lubrication, temperature and torque setting.

  • Brushless motor
  • Available in single and automatic 2-speed gearbox
  • Low battery warning to prevent torque output reduction
  • Controlled bolting – repeatability of +/- 3%
  • Extremely low noise level – only 65 dB
  • Automatic reaction arm release
  • Possibility to set torque in 1-50 levels instead of torque settings
  • Lithium-ion 18V / 5.2 Ah and 8.0 Ah battery technology
  • Optional:
    • Lithium-ion 18V / 8.0 Ah battery
    • Double Safety Button
    • B-RAD Drop Prevention

B-RAD SELECT tools include:

  • Reaction arm and retaining ring
  • 2 Lithium-ion 18V/5.2 Ah batteries with charger (For the B-RAD SELECT 4000 & 7000: 1x 5.2 Ah and 1x 8.0 Ah)
  • Weatherproof storage case
  • User manual
  • Calibration certificate

b-rad_set

Optional 8.0 Ah LiHD high-performance battery pack

The combination of new high-performance battery cells and completely newly developed electronic components in the pack ensure that maximum power remains available for a longer time. So you can now tighten even more bolts compared to the already impressive performing 5.2 Ah batteries.

Unfortunately, because of the increased power output, it is not possible to airfreight the 8.0 Ah battery due to IATA restrictions. These restrictions do not apply to sea and overland transport. Therefore RAD’s battery powered torque wrenches will not be equipped as standard with the LiHD 8.0 Ah battery pack but with the current 5.2 Ah battery pack.

Part number 8.0 Ah LiHD battery pack: 200473

Optional: Double Safety Button

Part number: 25949

All B-RAD SELECT torque wrenches can optionally be equipped with a “Double safety button”. This optional safety system consists of an extra button on the topside of the tool which need to be pressed simultaneously with the trigger in order to start operation of the tool.

This system dramatically reduces the pinching risk with the reaction arm as it forces the operator to have two hands on the tool handle at all time.

SUITABLE REACTION ARMS FOR B-RAD SELECT BL 4000:

Standard
PN: 27022

Deep socket
PN: 24814

Double ended
PN: 25437

Blank
PN: 24813

Double ended blank
PN: 25016

Safety sliding
PN: 29430

Từ khóa: B-RAD SELECT 275, B-RAD SELECT 700, B-RAD SELECT 1400, B-RAD SELECT 1400-2, B-RAD SELECT 2000, B-RAD SELECT 2000-2, B-RAD SELECT 4000, B-RAD SELECT 4000-2, B-RAD SELECT 7000, B-RAD SELECT BL 275, B-RAD SELECT BL 700, B-RAD SELECT BL 1400, B-RAD SELECT BL 1400-2, B-RAD SELECT BL 2000, B-RAD SELECT BL 2000-2, B-RAD SELECT BL 4000, B-RAD SELECT BL 4000-2, B-RAD SELECT BL 7000

B-RAD SELECT BATTERY SERIES
Torque range: 50 – 7.000 Nm

The new B-RAD SELECT battery series torque wrenches comes with two simple buttons to increase or decrease the value by 10 Nm.
At the four-digit display the set torque value is displayed. The B-RAD SELECT remembers the last set torque value even after the battery has been removed.

Part
No.
Model Square
drive
Torque range Speed

Noise
Level

Inch Nm RPM DBA
30213 B-RAD SELECT 275 ½" or
¾"
50 - 270 Nm 47 65
28264 B-RAD SELECT 700 ¾" 170 - 700 Nm 21 65
28266 B-RAD SELECT 1400 ¾" 300 - 1.400 Nm 10 65
28267 B-RAD SELECT 1400-2 ¾" 300 - 1.400 Nm 71 65
28268 B-RAD SELECT 2000 1" 400 - 2.000 Nm 6 65
28269 B-RAD SELECT 2000-2 1" 400 - 2.000 Nm 19 65
28270 B-RAD SELECT 4000 1" 800 - 4.000 Nm 3 65
28271 B-RAD SELECT 4000-2 1" 800 - 4.000 Nm 19 65
28272 B-RAD SELECT 7000 1,5" 1.400 - 7.000 Nm 2 65
Part
No.
Model Square
drive
Weight Dim. A Dim. B Dim. C Dim. D
30213 B-RAD SELECT 275 ½" or
¾"
3,2 Kg 228 mm 63 mm 68 mm 262 mm
28264 B-RAD SELECT 700 ¾" 3,5 Kg 231 mm 63 mm 67 mm 262 mm
28266 B-RAD SELECT 1400 ¾" 3,5 Kg 231 mm 63 mm 67 mm 262 mm
28267 B-RAD SELECT 1400-2 ¾" 4,3 Kg 279 mm 63 mm 67 mm 262 mm
28268 B-RAD SELECT 2000 1" 4,0 Kg 244 mm 69 mm 69 mm 262 mm
28269 B-RAD SELECT 2000-2 1" 4,9 Kg 298 mm 69 mm 69 mm 262 mm
28270 B-RAD SELECT 4000 1" 6,0 Kg 285 mm 81 mm 81 mm 266 mm
28271 B-RAD SELECT 4000-2 1" 6,7 Kg 337 mm 81 mm 81 mm 266 mm
28272 B-RAD SELECT 7000 1,5" 8,8 Kg 295 mm 95 mm 95 mm 272 mm

TOOL KIT INCLUDING:

  • B-RAD SELECT 4000
  • Standard reaction arm (PN: 27022)
  • Two retaining rings (PN: 21474)
  • Two batteries with quick charger
  • Calibration certificate
  • Usermanual
  • Safety instructions on USB stick
  • Weatherproof storage case.


The B-RAD is especially suitable for jobs where electricity or compressed air are not available.

The number of cycles per battery is depending on stud length, lubrication, temperature and torque setting.

  • Brushless motor
  • Available in single and automatic 2-speed gearbox
  • Low battery warning to prevent torque output reduction
  • Controlled bolting – repeatability of +/- 3%
  • Extremely low noise level – only 65 dB
  • Automatic reaction arm release
  • Possibility to set torque in 1-50 levels instead of torque settings
  • Lithium-ion 18V / 5.2 Ah and 8.0 Ah battery technology
  • Optional:
    • Lithium-ion 18V / 8.0 Ah battery
    • Double Safety Button
    • B-RAD Drop Prevention

B-RAD SELECT tools include:

  • Reaction arm and retaining ring
  • 2 Lithium-ion 18V/5.2 Ah batteries with charger (For the B-RAD SELECT 4000 & 7000: 1x 5.2 Ah and 1x 8.0 Ah)
  • Weatherproof storage case
  • User manual
  • Calibration certificate

b-rad_set

Optional 8.0 Ah LiHD high-performance battery pack

The combination of new high-performance battery cells and completely newly developed electronic components in the pack ensure that maximum power remains available for a longer time. So you can now tighten even more bolts compared to the already impressive performing 5.2 Ah batteries.

Unfortunately, because of the increased power output, it is not possible to airfreight the 8.0 Ah battery due to IATA restrictions. These restrictions do not apply to sea and overland transport. Therefore RAD’s battery powered torque wrenches will not be equipped as standard with the LiHD 8.0 Ah battery pack but with the current 5.2 Ah battery pack.

Part number 8.0 Ah LiHD battery pack: 200473

Optional: Double Safety Button

Part number: 25949

All B-RAD SELECT torque wrenches can optionally be equipped with a “Double safety button”. This optional safety system consists of an extra button on the topside of the tool which need to be pressed simultaneously with the trigger in order to start operation of the tool.

This system dramatically reduces the pinching risk with the reaction arm as it forces the operator to have two hands on the tool handle at all time.

SUITABLE REACTION ARMS FOR B-RAD SELECT BL 4000:

Standard
PN: 27022

Deep socket
PN: 24814

Double ended
PN: 25437

Blank
PN: 24813

Double ended blank
PN: 25016

Safety sliding
PN: 29430

Từ khóa: B-RAD SELECT 275, B-RAD SELECT 700, B-RAD SELECT 1400, B-RAD SELECT 1400-2, B-RAD SELECT 2000, B-RAD SELECT 2000-2, B-RAD SELECT 4000, B-RAD SELECT 4000-2, B-RAD SELECT 7000, B-RAD SELECT BL 275, B-RAD SELECT BL 700, B-RAD SELECT BL 1400, B-RAD SELECT BL 1400-2, B-RAD SELECT BL 2000, B-RAD SELECT BL 2000-2, B-RAD SELECT BL 4000, B-RAD SELECT BL 4000-2, B-RAD SELECT BL 7000

B-RAD SELECT BATTERY SERIES
Torque range: 50 – 7.000 Nm

The new B-RAD SELECT battery series torque wrenches comes with two simple buttons to increase or decrease the value by 10 Nm.
At the four-digit display the set torque value is displayed. The B-RAD SELECT remembers the last set torque value even after the battery has been removed.

Part
No.
Model Square
drive
Torque range Speed

Noise
Level

Inch Nm RPM DBA
30213 B-RAD SELECT 275 ½" or
¾"
50 - 270 Nm 47 65
28264 B-RAD SELECT 700 ¾" 170 - 700 Nm 21 65
28266 B-RAD SELECT 1400 ¾" 300 - 1.400 Nm 10 65
28267 B-RAD SELECT 1400-2 ¾" 300 - 1.400 Nm 71 65
28268 B-RAD SELECT 2000 1" 400 - 2.000 Nm 6 65
28269 B-RAD SELECT 2000-2 1" 400 - 2.000 Nm 19 65
28270 B-RAD SELECT 4000 1" 800 - 4.000 Nm 3 65
28271 B-RAD SELECT 4000-2 1" 800 - 4.000 Nm 19 65
28272 B-RAD SELECT 7000 1,5" 1.400 - 7.000 Nm 2 65
Part
No.
Model Square
drive
Weight Dim. A Dim. B Dim. C Dim. D
30213 B-RAD SELECT 275 ½" or
¾"
3,2 Kg 228 mm 63 mm 68 mm 262 mm
28264 B-RAD SELECT 700 ¾" 3,5 Kg 231 mm 63 mm 67 mm 262 mm
28266 B-RAD SELECT 1400 ¾" 3,5 Kg 231 mm 63 mm 67 mm 262 mm
28267 B-RAD SELECT 1400-2 ¾" 4,3 Kg 279 mm 63 mm 67 mm 262 mm
28268 B-RAD SELECT 2000 1" 4,0 Kg 244 mm 69 mm 69 mm 262 mm
28269 B-RAD SELECT 2000-2 1" 4,9 Kg 298 mm 69 mm 69 mm 262 mm
28270 B-RAD SELECT 4000 1" 6,0 Kg 285 mm 81 mm 81 mm 266 mm
28271 B-RAD SELECT 4000-2 1" 6,7 Kg 337 mm 81 mm 81 mm 266 mm
28272 B-RAD SELECT 7000 1,5" 8,8 Kg 295 mm 95 mm 95 mm 272 mm

TOOL KIT INCLUDING:

  • B-RAD SELECT 4000
  • Standard reaction arm (PN: 27022)
  • Two retaining rings (PN: 21474)
  • Two batteries with quick charger
  • Calibration certificate
  • Usermanual
  • Safety instructions on USB stick
  • Weatherproof storage case.


The B-RAD is especially suitable for jobs where electricity or compressed air are not available.

The number of cycles per battery is depending on stud length, lubrication, temperature and torque setting.

  • Brushless motor
  • Available in single and automatic 2-speed gearbox
  • Low battery warning to prevent torque output reduction
  • Controlled bolting – repeatability of +/- 3%
  • Extremely low noise level – only 65 dB
  • Automatic reaction arm release
  • Possibility to set torque in 1-50 levels instead of torque settings
  • Lithium-ion 18V / 5.2 Ah and 8.0 Ah battery technology
  • Optional:
    • Lithium-ion 18V / 8.0 Ah battery
    • Double Safety Button
    • B-RAD Drop Prevention

B-RAD SELECT tools include:

  • Reaction arm and retaining ring
  • 2 Lithium-ion 18V/5.2 Ah batteries with charger (For the B-RAD SELECT 4000 & 7000: 1x 5.2 Ah and 1x 8.0 Ah)
  • Weatherproof storage case
  • User manual
  • Calibration certificate

b-rad_set

Optional 8.0 Ah LiHD high-performance battery pack

The combination of new high-performance battery cells and completely newly developed electronic components in the pack ensure that maximum power remains available for a longer time. So you can now tighten even more bolts compared to the already impressive performing 5.2 Ah batteries.

Unfortunately, because of the increased power output, it is not possible to airfreight the 8.0 Ah battery due to IATA restrictions. These restrictions do not apply to sea and overland transport. Therefore RAD’s battery powered torque wrenches will not be equipped as standard with the LiHD 8.0 Ah battery pack but with the current 5.2 Ah battery pack.

Part number 8.0 Ah LiHD battery pack: 200473

Optional: Double Safety Button

Part number: 25949

All B-RAD SELECT torque wrenches can optionally be equipped with a “Double safety button”. This optional safety system consists of an extra button on the topside of the tool which need to be pressed simultaneously with the trigger in order to start operation of the tool.

This system dramatically reduces the pinching risk with the reaction arm as it forces the operator to have two hands on the tool handle at all time.

SUITABLE REACTION ARMS FOR B-RAD SELECT BL 4000:

Standard
PN: 27022

Deep socket
PN: 24814

Double ended
PN: 25437

Blank
PN: 24813

Double ended blank
PN: 25016

Safety sliding
PN: 29430

Từ khóa: B-RAD SELECT 275, B-RAD SELECT 700, B-RAD SELECT 1400, B-RAD SELECT 1400-2, B-RAD SELECT 2000, B-RAD SELECT 2000-2, B-RAD SELECT 4000, B-RAD SELECT 4000-2, B-RAD SELECT 7000, B-RAD SELECT BL 275, B-RAD SELECT BL 700, B-RAD SELECT BL 1400, B-RAD SELECT BL 1400-2, B-RAD SELECT BL 2000, B-RAD SELECT BL 2000-2, B-RAD SELECT BL 4000, B-RAD SELECT BL 4000-2, B-RAD SELECT BL 7000

Kết nối Intagrams
thiết kế nội thất biệt thự tphcm Spa chăm sóc da Spa trị tàn nhang